46
-EN
01GB04INE-W940E.fm
ALPINE INE-W940E 68-25285Z52-A (EN)
Adjusting guides simultaneously
Touch
[Link]
.
The 3 vertical guides of the currently-selected guide link
together, allowing them to be adjusted simultaneously.
Turning guide display ON/OFF
Turning the selected guide off.
1
Touch
[ON/OFF]
.
The currently selected guide will turn off.
2
To turn the guide on, touch
[ON/OFF]
again.
•
Guides that are turned off are still adjustable.
Returning guides to default.
1
Touch
[Default]
.
A message window will appear.
2
Touch
[OK]
.
Adjusted values will return to default settings.
Guide Display ON/OFF Setting
1
Touch
[Guide OFF]
on the Rear camera display
screen.
The guide disappears, and then the
[Guide OFF]
switch
changes to
[Guide ON]
.
2
Touch
[Guide ON]
to turn on the guide.
Adjusting the Caution Display Location
Touch
[Caution ]
.
•
For each touch, the caution location moves to the top or bottom of the
screen.
Camera Interrupt Setting (Power OFF
Mode)
[Camera Interrupt]
is selected on the Camera setup menu in step 3.
Refer to “Camera Setup Operation” (page 45).
You can set whether to display the rear camera image when the gear
lever is moved to the reverse (R) position while the unit is power off.
Setting item: Camera Interrupt (Power OFF Mode)
Setting contents: On (Initial setting) /Off
On:
The rear camera image is displayed
Off:
The rear camera image is not displayed
01GB00INE-W940E.book Page 46 Monday, July 8, 2013 5:14 PM
Summary of Contents for INE-W940E
