-EN
Turning Power On or Off
1
Turn the ignition key to the ACC or ON position.
The system is automatically turning on. After turned on, the
opening screen appears first and then the mode screen
(map screen, radio screen, etc.) appears.
•
When turned on, the system displays the last mode
screen that was displayed before the ignition key was
turned off. For example, when the navigation mode
screen is displayed, if you turn off the ignition key and
then turn it on, the system displays the navigation mode
screen again.
2
To turn off the system, press and hold the
<SOURCE/PWR> button for more than 3 seconds.
The system is turned off.
•
The unit can be turned on by pressing any button on the unit, except
(Eject).
Inserting/Ejecting a Disc
1
Insert the disc with the label side facing up.
When you insert the disc up to certain point, it is
automatically pulled into the unit. The unit starts to play the
disc.
•
Do not touch the surface of the disc directly with your fingers.
•
Before inserting or removing the disc, always turn the ignition key to
ACC or ON. You cannot remove or insert the disc with the ignition
key turned to OFF.
1
Press <
>.
When the disc has been ejected part way, take it out.
•
If the disc cannot be ejected by pressing <
>, press and hold
<
> again for at least 10 seconds.
Using the Front AUX Input Terminal
Connect a portable music player, etc., by simply connecting it to the
input on the front panel. An optional adapter cable is required (standard
RCA to 3.5ø mini-phono plug or 3.5ø to 3.5ø mini phono plug).
You can also play back video connecting with an optional AV cable (4-
pole mini AV plug to 3-RCA).
1
Remove the cover from the Front AUX Input Terminal.
2
Connect a portable music player, etc., by using an
optional adapter cable.
Usable 4-pole mini AV plug
The unit accepts the following 4-pole mini AV plug pin-out:
•
Please check pin-out carefully before use of this product. Depending
on the cable, there may be no picture and/or sound.
Adjusting the Volume
You can adjust the volume by the button on the body or the Setup
screen.
1
Press <
> or <
>.
: Turns up the volume.
: Turns down the volume.
•
Navi MIX Level: The audio volume during the navigation guide can
be set by adjusting the audio volume while the navigation guide
continues. When the navigation guide finishes, the previous audio
volume and the previous screen are restored. For example, if
navigation cuts in when the volume is lower than the setting level, the
volume during the navigation guide will be reset to the current
listening volume. (When the navigation guide cuts in, the audio
volume does not increase.)
Adjust on the Setup screen.
For details, see “Navi Guidance Volume Adjustment” (page 92).
Basic Operation
Inserting the Disc
Removing the Disc
Disc Slot
Adjusting the volume of the Audio/Visual
mode
Adjusting the volume of the Navi Guidance
Front AUX Input terminal
Audio L (White)
Audio R (Red)
Ground
Video (Yellow)
