background image

53

Touch 

[

]  (TA)

.

The “TA” indicator lights up and the unit switches to standby mode 
for the traffic announcement.
When the traffic announcement is received, the “TP” indicator lights 
up and the unit switches to the DAB source screen to receive it.

• The “TP” indicator lights up during standby mode off in a condition 

other than the DAB source to indicate that the unit is receiving the 
traffic announcement.

• This setting works interlocked with the traffic announcement 

(Emergency Broadcast) of RDS.

Touch 

[

]  (News)

.

The “NEWS” indicator lights up and the unit switches to standby 
mode for the News announcement.
When the News announcement is received, the unit switches to the 
DAB source screen to receive it.

• This setting works interlocked with the News announcement 

(Emergency Broadcast) of RDS.

Inputting Channel Number Directly and 
Receiving the Broadcasts

You can receive your desired station by inputting the channel number 
directly.

1

Touch 

[

]  (Direct  Tune)

.

The numeric keypad input mode screen appears.

2

Input the desired channel number.

You can enter channel numbers of up to three digits.
Each time you enter a number, receivable channels will be 
narrowed down.

• Touch 

[

]

 to delete an entered number.

To delete all the numbers you have entered, touch 

[

]

 for at 

least 2 seconds.

3

Touch 

[OK]

.

Switching to Secondary Service Components

When the current Service Component includes Secondary Service 
components, the Function mode switch 

[

]  (Sub.Ch)

 becomes 

available.

Touch 

[

]  (Sub.Ch)

.

The Primary indicator switches to the Secondary indicator, and the 
Secondary Service Component is received.

• When the Secondary Service Component finishes, the unit 

automatically switches to the Primary Service Component.

• Touch 

[

]  (Sub.Ch)

 again to switch to the Primary Service 

Component while receiving the Secondary Service Component.

• If there are more than one Secondary Service Component, each time 

you touch 

[

]  (Sub.Ch)

 the indicator changes in the order of 

Secondary1 

 Secondary2 … 

 Primary.

Displaying DAB Text

Text messages from a DAB station can be displayed.

1

Tune in a DAB station that transmits text messages.

2

Touch 

[

]  (Info)

 in the DAB mode repeatedly to switch 

to the desired display.

Station Info Mode 

 Dynamic Label Mode 

 Station Info 

Mode

Station Info Mode
Frequency, Channel No./Ensemble Label/Service Label/PTY 
Name

Dynamic Label Mode
Dynamic Label (Displays the information related to the current 
receiving station)

About DAB/DAB+/DMB

What is DAB?

DAB (Digital Audio Broadcasting) is the third generation 
broadcasting technology following the traditional analogue 
technologies such as FM. The advantages of DAB include being more 
robust with regard to noise, interference, instability, etc., during radio 
signal transmission. Also, it can provide stereo CD-quality sound and 
digital information, and it can resist multipath interference 
guaranteeing high-quality reception for fixed, portable and mobile 
devices.

What is DAB+?

WorldDMB, the organisation in charge of the DAB standards, 
announced DAB+, a major upgrade to the DAB standard in 2006, 
when the HE-AAC v2 audio codec (also known as eAAC+) was 
adopted. The new standard, which is called DAB+, has also adopted 
the MPEG Surround audio format and stronger error correction 
coding in the form of Reed-Solomon coding. DAB+ has been 
standardised as ETSI TS 102 563.

What is DMB?

DMB (Digital Multimedia Broadcasting) is a future-orientated, new 
generation broadcasting system based on DAB (Digital Audio 
Broadcasting). Where DAB upgraded the traditional analogue sound 
of FM to a CD-quality level, DMB advances simple sound 
broadcasting to the multimedia arena, striving to provide a visual 
service while transmitting high-quality sound. Users include 
entertainment programmes, intellectual traffic navigation, electronic 
newspapers and magazines, information provided by financial 
markets, the Internet, and integrated city information. It can be 
widely used by mobile carriers such as buses, taxis, light railways, 
underground railways, trains, ferries, airports, and by all kinds of 
people in the home and office.

Receiving Traffic Announcement

News Programme Interruption

Summary of Contents for INE-F409E


















































































Reviews: