Alpine CRA-1655RF, Owner'S Manual

Page: 12 / 44

12
English
CD Operation
1.2.4
1.2.4
3
3
1
3
2
4
POWER
UP DN
UP DN
M.S.CD
POWER
(Remote Control Unit/
Unité de télécommande/
Unidad de control
remoto)
(Remote Display Unit/Unité
d'affichage de télécommande/
Unidad de visualizador de
control remoto)
(Remote Control Unit/
Unité de télécommande/
Unidad de control
remoto)
(Remote Display Unit/Unité
d'affichage de télécommande/
Unidad de visualizador de
control remoto)
(Remote Control Unit/
Unité de télécommande/
Unidad de control
remoto)
(Remote Display Unit/Unité
d'affichage de télécommande/
Unidad de visualizador de
control remoto)
POWER
(Remote Control Unit/
Unité de télécommande/
Unidad de control
remoto)
(Remote Display Unit/Unité
d'affichage de télécommande/
Unidad de visualizador de
control remoto)
Modulator Frequency Setting
Press the POWER button to turn on the unit.
Press and hold the POWER button (for at least
2 seconds).
Use the UP and DN buttons to select the
desired frequency. Make the selection while the
Frequency mode is displayed. The Frequency
is varied by 200 kHz (0.2 MHz) steps from 87.7
to 89.9 MHz.
Press the POWER button.
Notes:
•
Select a frequency that is not used by a
strong, local FM station. This will prevent
interference while listening to CD.
• To listen to an FM broadcast, turn down the
volume of the radio then turn power off to
the CRA-1655RF. Tune the radio to your
desired station and adjust the volume to
your preference.
English
Basic Operation
PWR
FREQ.
PWR
FREQ.
PWR
FREQ.
89.9