background image

17

-EN

01GB04CDE101E.fm

ALPINE CDE-101E 68-09359Z76-B (EN)

Connecting to an External Amplifier (POWER IC)

When an external amplifier is connected, sound quality can be improved 
by stopping the power supply of the built-in amplifier. 

CDE-103EBT/CDE-102E:

No sound is produced by the system when the power output is set to 
OFF.

Setting the AUX+ SETUP Mode

An external device (such as a portable music player) can be connected 
to the Full Speed connector of this unit. A conversion cable 
(KCE-237B) for building up the AUX IN (optional) is required.

A portable music device and an iPhone/iPod cannot be connected to the 
Full Speed connector at the same time.

You can change the AUX+ name display when AUX+ SETUP is set to 
ON. Press 

/

/

ENT

 when AUX+ SETUP is set to ON, and select 

AUX+ NAME by turning the 

Rotary encoder

, then press 

/

/

ENT

After that, turn the 

Rotary encoder

 to select the desired AUX+ name.

Setting the AUX NAME mode (CDE-103EBT/CDE-102E 
only)

You can change the AUX NAME display in the SETUP mode.

*

1

 After the setting is completed, AUX is displayed on the unit.

*

2

 After the setting is completed, PMD is displayed on the unit.

POW ON (Initial setting) / POW OFF

POW OFF:

Use this mode when the line output of this unit 
is used to drive an external amplifier. In this 
setting, the head unit’s internal amplifier is 
turned OFF and cannot drive speakers.

CDE-101E/CDE-101EM:

POW ON :

The speakers are driven by the built-in 
amplifier.

Amplifier

Front
left

Front
right

Amplifier

Rear 
left

Rear 
right

Amplifier

Front
left

Front
right

Speakers

SPEAKER 
RIGHT FRONT

Front
right

SPEAKER 
RIGHT REAR

Rear 
right

SPEAKER 
LEFT REAR

Rear 
left

SPEAKER 
LEFT FRONT

Front 
left

AUX+ ON / AUX+ OFF (Initial setting)

AUX+ ON:

Set to ON when a portable device is connected. If 

SOURCE/

 is pressed and AUX+ is selected, the 

sound of the portable device is input to the unit.

AUX+ OFF:

Set to OFF when an iPhone/iPod is connected.

AUXILIARY

*

1

(Initial setting) / TV / DVD / PORTABLE

*

2

 / GAME

01GB00CDE101E.book  Page 17  Monday, November 3, 2008  10:12 AM

Summary of Contents for CDE-101E



































Reviews: