background image

18

-EN

Title/Text Operation

Displaying the Title/Text

It is possible to display the Disc/Station title if the title has been
previously inputted. For details, see “Titling Discs/Stations” (page
19). Text information, such as the disc name and the track name, will
be displayed if playing a CD text discs with the title inputted. It is
also possible to display the folder name, the file name, and the tag,
etc. while playing MP3/WMA files.

Press 

TITLE

  .

The mode will change every time the button is pressed.

About “Title” and “Text”

Title:

With this device, it is possible to input the CD/Station
name (refer to page 19). This inputted name is referred
to as a “title.”
You cannot input or display titles on MP3/WMA discs.

Text:

Text compatible CDs contain text information such as
the disc name and track name. Such text information is
referred to as “text.”

Radio mode:

CD mode:

MP3/WMA mode:

*

1

If the title was not previously input, “NO TITLE” is displayed.

*

2

Displayed during playback of a disc with CD Text. “NO TEXT”
will be displayed when the CD contains no Text data.

*

3

SCAN mode... Scrolls through the text information below.
CD: TEXT (disc name, track name)
MP3/WMA: TAG (track name, artist name, album name), FOLDER
NAME, FILE NAME

*

4

If an MP3/WMA file contains ID3 tag/WMA tag information, the
ID3 tag/WMA tag information is displayed. (track name, artist
name, and album name). All other tag data is ignored.
“NO DATA” will be displayed if an MP3/WMA file contains no
ID3 tag/WMA tag information.

*

5

Root folders are displayed as “- - - - - - - - - - - - - - - -.”

• Some characters may not be displayed correctly with this device,

depending on the character type.

• The CD changer must also be CD Text compatible for the Text

information to be displayed.

• When the Scroll Setting (refer to page 19) is set to “SCROLL

MANUAL,” press and hold 

TITLE

   for at least 3 seconds to

scroll the Text information only once (TEXT DISPLAY, FOLDER
NAME DISPLAY, FILE NAME DISPLAY or TAG DISPLAY mode).

• “NO SUPPORT” is displayed when the desired text information

cannot be displayed on this unit.

About Indicator Display

When the title/text is being displayed, the indicator "

9

" of each

mode lights as follows:

FREQUENCY DISPLAY

CLOCK DISPLAY

TITLE DISPLAY

*

1

TRACK NO. /ELAPSED TIME DISPLAY

TEXT DISPLAY (DISC NAME)

*

2

TRACK NO. /CLOCK DISPLAY

TEXT DISPLAY (TRACK NAME)

*

2

TITLE DISPLAY

*

1

SCAN MODE DISPLAY

*

3

FOLDER NO. /FILE NO./ELAPSED TIME DISPLAY

FOLDER NAME DISPLAY

FOLDER NO. /FILE NO./CLOCK DISPLAY

FILE NAME DISPLAY

TRACK NAME DISPLAY

ARTIST NAME DISPLAY

*

4

ID3 tag/
WMA tag

ALBUM NAME DISPLAY

SCAN MODE DISPLAY

*

3

*

5

123456

This indicator is constantly lit.

BAND

FUNCTION/SETUP

/

 / 

-

-

/

J

 / ENT.

TITLE 

Summary of Contents for CDA-W560E





































Reviews: