89
-
EN
TITLE
Mixing the Bass
Sound of the Centre
Channel with the
Sound of the Front
Left and Right
Channels (C.BASS
SPLIT)
Mixing bass sound
to the rear channel
(REAR MIX)
Outputting the Front
Channel Signals
from the Rear
Channels (REAR
FILL)
Achieving powerful
high volume sound
(LISTEN MODE)
Adjusting the DVD
level (DVD LEVEL)
Description
The operations performed with the remote control unit in
step 1 can also be performed by pressing and holding
MENU (SETUP)
for at least 3 seconds, moving the joystick
up or down to select “AP SETUP”, then pressing the joystick.
This adjustment is ineffective if the centre speaker is set to
“OFF” in the speaker setup settings.
Once the settings are made, we recommend storing them
in the memory. See page 93 for instructions.
The operations performed with the remote control unit in
step 1 can also be performed by pressing and holding
MENU (SETUP)
for at least 3 seconds, moving the joystick
up or down to select “AP SETUP”, then pressing the joystick.
This adjustment is ineffective when the rear speaker setup
setting is set to “OFF”.
Once the settings are made, we recommend storing them
in the memory. See page 93 for instructions.
This adjustment is ineffective when the rear speaker setup
setting is set to “OFF”.
Once the settings are made, we recommend storing them
in the memory. See page 93 for instructions.
The operations performed with the remote control unit in
step 1 can also be performed by pressing and holding
MENU (SETUP)
for at least 3 seconds, moving the joystick
up or down to select “AP SETUP”, then pressing the joystick.
The operations performed with the remote control unit in
step 1 can also be performed by pressing and holding
MENU (SETUP)
for at least 3 seconds, moving the joystick
up or down to select “AP SETUP”, then pressing the joystick.
Once the settings are made, we recommend storing them
in the memory. See page 93 for instructions.
The operations performed with the remote control unit in
step 1 can also be performed by pressing and holding
MENU (SETUP)
for at least 3 seconds, moving the joystick
up or down to select “AP SETUP”, then pressing the joystick.
Once the settings are made, we recommend storing them
in the memory. See page 93 for instructions.
Related page
Page 63
Page 63
Page 63
Page 66
Page 66
Page 66
Page 69
Page 69
Page 70
Page 72
Page 72
Page 74
Page 74
