Automatic Adjustments
24
-
EN
11
When the system reset is completed, return to
the car and check that the setting value of the
Automated Time Correction is reflected.
If the setting value is not changed, the
microphone may not receive sound, the
speaker may be damaged, the connection
and wiring may be a malfunction.
To store the settings, refer to “Storing settings
in the memory” (page 93).
• Press
6 (RTN)
, or
RETURN
on the remote control in
the setting mode to return to the previous item.
○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
The automatic adjustment procedure consists
of the operations described below and
requires about a few minutes to be completed.
Perform the time correction.
When the automatic adjustment is com-
pleted, a system reset will be performed.
Strong sounds are produced during the
automatic adjustment procedure (except for
TW, Sub WF). These sounds can be heard
outside the vehicle. Be sure to park the
vehicle in a place where the sound will not be
a nuisance.
• “NO MIC ERR” is displayed when a microphone has
not been connected. Press
2 (ENT)
to clear the
display.
Supplement
See page 25 for supplementary information.
Performing time correction automatically (Automated Time Correction)
(continued)
• “NO MIC ERR” is
displayed when a
microphone has not been
connected. Press
ENTER
to clear the display.
