8
DIPSWITCHES AND LED
’s
Dipswitch 1-8
1. ON = enrol
(dipswitch 2, 3, 4, 5 and 6 OFF)
2. ON = toggle / OFF = pulse
(only for transmitters, not for keyfobs or detectors)
3. ON = erase
(dipswitch 1, 2, 4, 5 and 6 OFF)
4. Not in use
(not in use)
5. Not in use
(not in use)
6. ON = battery save mode PowerG
(only for PowerG PIR sensors)
Leds
•
LEARN - green
•
ERASE - red
•
ZONE - yellow
The green LEARN LED is visible on the outside of the AT-308 receiver via the existing light guide. If all DIP switches
of DIP switch 1-8 are set to OFF, the LEARN LED will illuminate when an enrolled wireless component is received by
the AT-308 receiver, this way it can be visually checked whether a wireless component is being received.
WEEE-declaration
This Alphatronics product is manufactured with the most modern technology and consists of
high-quality devices. Most of the devices used can be recycled.
The symbol means that this product should be recycled separately and not put in the normal
waste bin together with normal household waste.
This product can be handed over to your local city council disposal point, shop or supplier.
© Alphatronics B.V.
–
2020
Version 2.0
–
April 2020
