10715 Springdale Ave, Ste 4, Santa Fe Springs, CA 90670
l
Tel: 1-888-287-9228
l
Fax: 1-888-258-9183
l
E-mail: [email protected]
Installation Instructions
LED Wall Pack
Installation guide valid for the following models:
WPA-
15B
WPA-
60B
WPA-
24B
WPA-
80B
WPA-
42B
WARNING
RISK OF ELECTRIC SHOCK.
Disconnect power at fuse or circuit breaker before installing or servicing.
WARNING
RISK OF FIRE OR ELECTRIC SHOCK.
The LED Wall Pack must be installed by a qualified electrician in accordance with applicable
federal, state, and local laws and codes. Installation requires knowledge of luminaire electrical
systems and installer should be familiar with the operation of this product. If not qualified, do not
attempt installation; contact a qualified electrician. Manufacturer assumes no responsibility for the
improper installation of this luminaire.
WARNING
To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp
objects. When installing this kit, drilling may damage luminaire wiring and electrical parts. Check for
wiring and components in enclosure before drilling.
NOTE
Only those open holes indicated in the photographs and/or drawings may be made or altered as
a result of kit installation. DO not leave any other open holes in an enclosure of wiring or electrical
components.
NOTE
To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or any shape
objects.
Contact manufacturer with any questions or concerns regarding installation of this luminaire.
1
Summary of Contents for WPA-15B
Page 3: ......
