Eisbaer Aurora
Alphacool International GmbH
47
INITIAL START-UP
If your Eisbaer AiO is unusually loud during initial operation, tipping the entirePC case back
and forth a little can help. The higher volume level of the pump occurs due to air bubbles in
the closed system. These bubbles form during transport or due to movement during
installation.
Double-check that the radiator is mounted above the water block. This setup helps de-
aerate the system. After around 12 hours of operation any air in the system should be
eliminated and the pump should run quietly as usual.
USING QUICK RELEASE CONNECTORS
The pre-installed quick-release fastener offers the possibility of expanding the Eisbaer loop
quickly and easily. The connector is compatible with many other products from our range.
Attention: 2 -3 drops of water can escape when unscrewing the quick release mechanism
–
This
is normal.
WATER OUTLET
WATER INLET
