4
Subject to change without notice | 83053700gUK – Translation into English of the original German operating manual | ait-deutschland GmbH
Intended use
The unit may be used only for the intended purpose.
This means:
•
For heating.
•
For domestic water heating.
•
For cooling ( passive through external
hydraulics)
The unit may be operated only within its technical
parameters.
Overview “Technical data / scope of delivery”.
NOTE.
Notify the responsible power supply company of
the use of a heat pump or heat pump system.
Disclaimer
The manufacturer is not liable for losses resulting from
any use of the unit which is not its intended use.
The manufacturer’s liability also expires:
•
If work is carried out on the unit and its
components contrary to the instructions in this
operating manual.
•
If work is improperly carried out on the unit and
its components.
•
If work is carried out on the unit which is not
described in this operating manual, and this
work has not been explicitly approved by the
manufacturer in writing.
•
If the unit or components in the unit have been
altered, modified or removed without the explicit
written consent of the manufacturer.
EC conformity
The unit bears the CE mark of conformity.
EC declaration of conformity
Safety
The unit is safe to operate for its intended use. The
construction and design of the unit conform to current
state of the art standards, all relevant DIN/VDE
regulations and all relevant safety regulations.
Every person who performs work on the unit must
have read and understood the operating manual prior
to starting any work. This also applies if the respective
person has already worked with such a unit or a similar
unit or has been trained by the manufacturer.
Every person who performs work on the unit must
comply with the applicable accident prevention and
safety regulations. This applies in particular to the
wearing of personal safety gear.
DANGER!
Risk of fatal injury due to electric shock!
All electrical connections must be carried
out by qualified electricians only.
Before opening the unit, disconnect the
system from the power supply and prevent
it from being switched back on!
WARNING!
Only qualified personnel (trained heating,
cooling and refrigerant engineers and
electricians) may carry out work on the
unit and its components.
WARNING!
Observe safety labels on and in the unit.
WARNING!
Unit contains refrigerants!
Leaking refrigerant could result in
personal injury or material damage.
Therefore:
– Switch off unit
– Thoroughly ventilate installation room
– Notify the manufacturer’s authorised
service centre
CAUTION.
For safety reasons:
Never disconnect the unit from the power
supply, unless the unit is being opened.
