Learning button
Wind adjust button
Wind threshold
Light adjust button
Light threshold
SUN & WIND SENSOR p1
ALPHA SUPPORT PHONE (909) 307-2320
Power: Ni-MH/3.6
olar Panel + Battery
V S
Protectio
ndex: IP44
n I
Temperature: -20
℃
℃
to
+ 60
Working Current: ≤12mA
Codes:
Codes
Rolling
Frequency: 433.92MHz
Instruction guide for
R
Wind/Sun Sensor S001
1. TECHNICAL DATA
2. STRUCTURE
Wind cup
Base
Solar panel
RS-001
3. MOUNTING
It’s very important that the sensor be mounted so that the wind cups are as level as possible, as per the diagrams above. Failure to
do so may create friction that makes it harder for the cups to spin, thus affecting the performance and reliability of the device. Also
ensure that the device is mounted in an area that receives the same wind conditions as the awning if using wind sensing, and also
full sunlight during the day if using the sun sensing for control purposes. Make sure to test for connection between the device and
-
the motor once set up.
02. Installation chart
4. INSTALLATION POSITION
Fixing components
Screw
