Page
37
to
71
WARNING:
If no password is configured for a given user-level, the function relative to that access level are available to
anyone.
Pay attention not to forget the password. If the access level password is forgotten, it is impossible to access
the specific operations for that level.
Status LED
Below the touch screen display, a back illuminated Logo will inform the user at a glance the status of the UPS. The
following are the various colour-states and their respective meanings.
Light
blue
(pulsing):
Normal
operation
No anomalies are present and the
system is working in the selected mode.
Dark blue: Bypass operation
The
system
is
working
from
temporary bypass.
Orange: Anomaly
The system is working from battery,
forced bypass or an anomaly or warning
occurred.
Refer to the “STATUS/ALARM CODES”
section for detailed information about the
status of the UPS.
Flashing red: Fault condition
A fault or lock occurred, or the load is not
powered due to an unexpected condition
(e.g. Emergency Power Off). Refer to the
alarm page of the display for detailed
information about the status of the UPS.
Buzzer
The UPS status and any anomalies are reported by a buzzer, which emits a modulated sound according to the
various UPS operating conditions.
The different types of sound are described below:
