5.4
Start-Up
1.
Switch on the FXM battery circuit breaker. The LCD displays
STANDBY
.
2.
Switch on the AC utility breaker at the main power panel. Switch on the AC Input circuit breaker on the
FXM. If qualified,
LINE
appears on the LCD.
3.
Allow the batteries to charge for approximately 8 hours.
4.
The load should be receiving power, if not, perform troubleshooting.
6.
Theory of Operation
6.1
Block Diagram
Figure 24 shows the eight PCBs in the FXM350 and the communication path between them.
Page
34
to
106
Summary of Contents for FXM 350 Series
Page 1: ...Alpha FXM Series 350 USER MANUAL...
Page 21: ...Page 20 to 106...
