Alpha One FALCON SPERBER mini DMX 2000W, Instructions For Use Manual

Page: 16 / 26

- 16 –
Version 2.0 November 2008
3.9 Cleaning
The cleaning and maintenance of the components in the head may be carried out
only by qualified and trained specialist personnel.
To maintain the optimum efficiency of the searchlight, the safety glass inside the
light exit opening must be kept clean. This cleaning has a significant effect in
creating top-quality and perfect light beams.
Clean the glass when cool with a glass cleaner and a lint-free cleaning cloth.
Avoid touching the glass surface with the bare hands.
To ensure that optimum cooling is maintained, check the exterior protective covers
for the fan at regular intervals.
3.10 Trouble-shooting
Problem Cause Remedy
No electrical supply
Is mains cable connected to the
electrical supply?
Is the mains switch switched
on?
Equipment is dead
Circuit breaker is switched off
Switch on the circuit breaker
behind the inspection flap.
Circuit breaker trips Short circuit in the equipment
Repair must be carried out only
by qualified personnel
Defective illuminant
Repair must be carried out only
by qualified personnel
Ignition occurs, but illuminant
does not start
Short exists in activation circuit
Repair must be carried out only
by qualified personnel
Equipment is too hot Check external air supply
Defective cooling
Repair must be carried out only
by qualified personnel
Defective illuminant
Repair must be carried out only
by qualified personnel
Illuminant is spent
Repair must be carried out only
by qualified personnel
Illuminant is switched off
Internal voltage supply is
defective Repair must be carried out only
by qualified personnel