Inverter Settings
900-0117-01-00 Rev A
67
Sound
The Sound menu item allows the user to enable, or disable, sounds when a button is pushed or the control
wheel is used.
To access the
Sound
menu:
1.
Access the
System Settings
menu as shown in Figure 59.
2.
Use the control wheel to highlight the
Sound
menu.
Press the button in the center of the control wheel to accept the selection.
3.
Use the control wheel to change the value of each set point.
Press the button in the center of the control wheel to accept the selection.
The selection should automatically advance to the next set point when the button is pushed.
Repeat for each set point.
4.
After setting the parameters for each set point, press the
TOP
navigation key to return to the
System
Configuration
screen.
Figure 63
Sound
Set Points:
Button Beep
= Enabled or Disabled
Wheel Click
= Enabled or Disabled
Summary of Contents for OutBack Power MATE3
