Operation
15
(06/2016)
Device Information
The product model, parameters, and SN code of the controller are displayed on the Device Information screen. See the figure
below.
Figure 10, Device Information Screen
Test Operation
Load switch test operation is conducted on the connected charge controller to determine if the load output is normal. This test
operation does not affect working settings under actual load. The charge controller will exit from test mode when exiting the
operational interface of the test.
Figure 11, Test Operation Screen
FLEXmax 30/40
Rate.Vol:
12V
Char.Cur:
10.0A
Disc.Cur:
2.6A
FLEXmax 30/40
SN:0002201301200045
Test Operation
FLEXmax 30/40:
OFF
