PARTS LIST
1. Power switch
2. Touching screen display
3. Automatic cut off
4. MODE touch
5. TIMER touch
6. UP touch
7. DOWN touch
8. Fan visual display
9. Heating visual display
10. Température display
11. Time display (for timer mode)
TO USE
• Place the product on a flat, stable, heat-resistant surface.
• Plug in.
• Press the Main Power Button (5). The screen operates and shows the room temperature.
• Press MODE (4) to select one of the three available mode.
First pressure : « Low » mode.
Second pressure : « High » mode.
Third pressure : « Fan » mode.
Fourth pressure : stop.
• In Low or High mode, use UP (6) and DOWN (7) touch to set the desired temperature. Temperature word
flashes on the screen during setting and desired temperature value is shown instead of ambient temper-
ature. Each pressure adds (UP) or withdraw (DOWN) one degree.
• « Low » mode: Low word flashes on the screen when this mode is selected.
If the desired temperature is higher than the ambient temperature, the appliance heats with 1100 W
power. The visual displays (8) and (9) appear and move on the screen.
When the ambient temperature reaches the desired temperature, the appliance stops heating (the visual
display (9) disappear) ; it fans for a few seconds and stops totally (the visual display (8) disappear).
If the ambient temperature decreases and reaches 3°C below the desired temperature, the heater starts
again.
• « High » mode: High word flashes on the screen when this mode is selected.
If the desired temperature is higher than the ambient temperature, the appliance heats with 2400W power.
The visual displays (8) and (9) appear and move on the screen.
6
5
7
6
4
1
2
8
9
10
11
3
notice RSBE 22/05/07 10:21 Page 6