25
ALNOR
®
ventilation systems
is a legally protected trademark and technical patent. All rights reserved.
w
w
w
.a
ln
or
.com
.p
l
User Manual
HRQ-PremAIR-BUT-LCD
4.6.3 Edit the CLOCK PROGRAM switch points
1. Use the CLOCK PROGRAM menu to go to the CLOCK PROGRAM switch points , refer to 4.6.
2. Touch the UP button or the DOWN button again and again to go through the available switch
points. The selected switch point blinks.
3. Touch the OK button to select a switch point for editing.
4. Touch and hold the UP button or the DOWN button to set the switch point time. Touch the OK
button to confirm the time.
5. Touch the UP button or the DOWN button to set the switch point mode. Touch the OK button to
confirm the new switch point settings. Touch the BACK button to return to the CLOCK PROGRAM
screen without changing the switch point settings.
4.7 DATE AND TIME menu
1. Touch the MENU button again and again until the DATE AND TIME menu icon shows.
2. Touch the OK button to enter the DATE AND TIME menu.
3. Touch the UP button or the DOWN button to set the year. Touch the OK button to go to the next
screen.
4. Touch the UP button or the DOWN button to set the month. Touch the OK button to go to the next
screen.
5. Touch the UP button or the DOWN button to set the day of the month. Touch the OK button to go
to the next screen.
6. Touch the UP button or the DOWN button to set the time.
7. Touch the OK button to store the DATE AND TIME settings. Touch the BACK button to return to the
default screen without changing the DATA and TIME.
5. Installation
5.1 Prepare for installation
DANGER:
Make sure that the electric power supply is switched off before you install the device.
Do not install the device in a metal casing.
Make sure that the mains voltage is 230 VAC, 50 Hz.
5.2 Installation procedure
Install the device according to the local requirements. The installation must be done by a professional.
5.2.1 Connect the wiring
MOTE:
Make sure that you use AWG12-24, 0.2-2.5 mm
2
wires to connect the power supply.
1. Connect N to the neutral or blue wire of the mains supply.
2. Connect L to the live or brown wire of the mains supply.
!
WARNING
!
