PAGE
19
ALMAC s.r.l.
Warning: the chassis must be completely lowered (chassis wide)
Attention: Do not excessively tighten the fixing straps to avoid damaging the
structure.
2.5
Checks on the machine before each use
•
Visually check under and around the machine to make sure that there are no
oil or fuel leaks. If leaks are discovered, follow the MAINTENANCE
instructions.
•
Make sure that there is no hydraulic oil leaking from the hoses and from the
other components (cylinders, distributors, fittings, etc.).
•
Check that there are no cut or worn electrical cables and that the connectors
are correctly secured.
•
Check the fuel level before starting so as to prevent interruptions while
working.
•
Check the engine oil level.
•
Check the hydraulic oil level.
•
Do not run the engine in closed areas like garages or similar. The engine
exhaust gas contains carbon monoxide, a poisonous gas that can quickly
saturate a closed space and cause difficulties or even death.
•
Check that no screw, bolt or ring nut is loose or missing.
•
Make sure that all the pins are in place and correctly secured.
•
Check that the steel structure is not deformed.
•
Make sure there are no cracks in the welds, damage or abnormal wear.
•
Make sure the tracks are not cut or abnormally worn.
Summary of Contents for MULTI-LOADER 6.0
