ALMAC BiBi 850-BL, Use And Maintenance Manual, Page: 77 / 127

BIBI 850-BL Use and maintenance manual Rev.00
76
Chapter 6
Maintenance
6.1 General maintenance
The main maintenance interventions and the frequencies with which they must be carried out are given
in the chart below.
Attention: All maintenance operations must be performed as indicated in Chapter 2 Safety information.
Most especially, maintenance must only be carried out after the emergency push-button has been pressed,
the engine turned off and using individual protective equipment
Attention: Disconnect the machine from all power sources
Attention: It is mandatory to perform all MEWP movements required for inspections/maintenance from the
ground and without persons in the basket. When checking machine operation from the basket, the required
movements must be performed as near to the ground as possible.
Note: Use of spurious spare parts or parts that have not been approved by the manufacturer voids the warranty
and relieves ALMAC S.r.l. from all liability.
Note:
Modifications or variations to the MEWP are forbidden unless authorized by the manufacturer.
Note: All maintenance work that is not described in this manual must be authorized by ALMAC S.r.l. and must
be performed by personnel authorized by the latter.
Attention: DO NOT USE THE MACHINE IF THERE IS AN ANOMALY IN ANY MECHANICAL OR
HYDRAULIC ELEMENT OR IN A CONTROL OR SAFETY DEVICE AMONG THOSE DESCRIBED
BELOW!
IMMEDIATELY CONTACT AN ALMAC SRL ASSISTANCE CENTRE