ALMAC AlmaCrawler JIBBI 1250 EVO, Translation Of Original Instructions, Page: 59 / 233

PAGE 59 ALMAC s.r.l.
2.7 Reduction of machine dimensions by complete closure of the JIB
If required, it is possible to reduce the length of the machine by removing the aluminium basket
and turning the basket support to the limit switch.
A = 3.3 m (10.82 ft)
B = 3.04 m (9.97 ft)
Normally the JIB is free to close up to -85°.
It is possible to re-close the JIB completely (-95°) with the following procedure:
1) Re-close the JIB to -85°and wait for the movement to stop;
2) Release the JIB closing command and operate it again waiting at least 6 seconds;
3) The JIB will completely close again.
Attention : With the JIB retracted at -95° it is PROHIBITED to rotate the column; collision risk with
the machine tracks.
A
-85
°
B
-9
5°