Allworx PowerFlex P810, User Manual

Page: 32 / 236

PowerFlex
8/24/48 Port GbE PoE Managed Switch User’s Guide
3.7
Groups
Use the function to configure SNMPv3 groups. Max Group Number: v1: 2, v2: 2, v3:10.
To configure SNMP Groups via the web interface:
1. Navigate to System > SNMP > Groups .
2. Specify the group security parameters.
3. Click
Apply . 0.
Figure 17: SNMP Groups Configuration
Parameter Description
Delete Check to delete the entry. It will be deleted during the next save.
Security Model Indicates the security model for this entry. Possible security models are:
v1 : Reserved for SNMPv1.
v2c : Reserved for SNMPv2c.
usm : User-based Security Model (USM).
Security Name A string identifying the security name for this entry. The string length is 1 to 32, and
the content is ASCII characters from 33 to 126.
Group Name A string identifying the group name for this entry. The string length is 1 to 32, and the
content is ASCII characters from 33 to 126.
Toll Free 1-866- ALLWORX • 585 -421- 3850 • www.allworx.com
Revised: October 30, 2013
Page 24