Allworx PowerFlex P810, User Manual

Page: 218 / 236

PowerFlex
8/24/48 Port GbE PoE Managed Switch User’s Guide
6.5
Diagnostics
This section provides a set of basic system diagnosis. The basic system check includes ICMP Ping,
ICMPv6, and VeriPHY Cable Diagnostics.
6.5.1 Ping
This section enables issuing ICMP PING packets to troubleshoot IPv4 connectivity issues.
To send an ICMP PING via the web interface:
1. Navigate to Maintenance > Diagnostics > Ping .
2. Specify the IP Address to ping.
3. Specify the Ping length, Count and Interval.
4. Click
Start . 0.
Figure 149:
ICMP Ping – Update figure
After clicking
Start, 5 ICMP packets transmit, and display the sequence number and roundtrip time
upon reception of a reply. The page refreshes automatically until responses to all packets are received,
or until a timeout occurs.
PING server 10.10.132.20
, 56 bytes of data
64 bytes from 10.10.132.20: icmp_seq=0, time=0ms
64 bytes from 10.10.132.20: icmp_seq=1, time=0ms
64 bytes from 10.10.132.20: icmp_seq=2, time=0ms
64 bytes from 10.10.132.20: icmp_seq=3, time=0ms
64 bytes from 10.10.132.20: icmp_seq=4, time=0ms
Sent 5 packets, received 5 OK, 0 bad
Toll Free 1-866- ALLWORX • 585 -421- 3850 • www.allworx.com
Revised: October 30, 2013
Page 210