PowerFlex
8/24/48 Port GbE PoE Managed Switch User’s Guide
5.7
Port Security
This section enables configuring the Port Security settings to restrict input to an interface by limiting and
identifying MAC addresses.
5.7.1
Limit Control
To configure Limit Control globally via the web interface:
1. Navigate to
Security
>
Port Security
>
Limit Control
.
2. Select Enabled to enable Port Security globally.
3. Check Aging Enabled.
4. Set Aging Period (Default is 3600 seconds).
0.
To configure Limit Control for each port via the web interface:
1. Select Enabled to enable Port Security for desired ports.
2. Specify the maximum number of MAC addresses in the “Limit” field
3. Set Action (Trap, Shutdown, Trap & Shutdown). This is the action taken on the port when a security
violation occurs.
4. Click Apply or click Reset to cancel changes and revert to previously saved values.
0.
Figure 132:
Port Security Limit Control Configuration
Toll Free 1-866-
ALLWORX • 585
-421-
3850 •
www.allworx.com
Revised: October 30, 2013
Page 192
Summary of Contents for PowerFlex P810
