Allworx PowerFlex P810, User Manual

Page: 134 / 236

PowerFlex
8/24/48 Port GbE PoE Managed Switch User’s Guide
4.14
GVRP
GVRP is an application based on Generic Attribute Registration Protocol (GARP), mainly used to
maintain the group membership information of the VLANs automatically and dynamically. GVRP
provides the VLAN registration service through a GARP application. It makes use of GARP Information
Declaration (GID) to maintain the ports associated with the attribute database and GARP Information
Propagation (GIP) to communicate among switches and end stations. With GID information and GIP,
GVRP state machine maintains the contents of Dynamic VLAN Registration Entries for each VLAN and
propagate the information to other GVRP-aware devices to setup and update the knowledge database,
the set of VLANs associated with current, active members, and the ports to reach these members.
4.14.1 Configuration
This page enables configuring the basic GVRP settings for all switch ports. The settings relate to the
currently selected stack unit, as reflected by the page header.
To configure GVRP Port settings via the web interface:
1. Navigate to Configuration > GVRP > Configuration .
2. Specify the GVRP mode and port Parameters.
3. Click
Apply . 0.
Figure 87:
GVRP Global Configuration
Toll Free 1-866- ALLWORX • 585 -421- 3850 • www.allworx.com
Revised: October 30, 2013
Page 126