Allworx
®
Connect™ Server Family Installation Guide
866.ALLWORX * +1 585 421 3850
Page 19
www.allworx.com
Version: F Revised: June 21, 2018
4.4 Connect the Network Ports
The data network ports are 10/100/1000 BASE-TX auto-sensing and auto MDI-MDIX ports. The
network port availability on the Connect servers is:
After properly configuring the server (see the
Allworx System Administrator’s Guide
Install Checklist, for
more information), plug in the network infrastructure cables. Use standard RJ-45 category 5e network
cables or better.
Caution:
Do not plug any network or ISP service into the Connect server without first properly configuring
the server as this may result in a disruption of network connectivity with other equipment on the
network.
MISE EN GARDE :
Ne branchez pas un réseau ou un service d’accès Internet (ISP) au serveur Connect, sans avoir
d’abord correctement configuré le serveur, car cela pourrait entraîner une interruption de la
connectivité réseau à d'autres appareils du réseau.
PRECAUCIÓN:
No conecte ningún servicio de red o ISP al servidor Connect sin haber configurado primero el
servidor, ya que esto puede ocasionar interrupciones en la conectividad de la red con otros
equipos dentro de la red.
Connect server
Port
300 Series
500 Series
731
ETH0
X
X
X
ETH1
X
X
X
ETH2
X
X
LED Identification
LED State
Description
Green
Off
No Link: no network connection.
On
Link: successful network connection.
Blinking
Activity: transmitting or receiving data.
Amber
Off
Speed: 10 or 100 Mb/s
On
Speed: 1000 Mb/S
