Alltion AM-2000, User Manual

Page: 20 / 46

Alltion (Guangxi) Instrument Co., Ltd.
16
Product Assembly | AM-2000 User’s Manual
High-Position Wall Mount
The wall to install the high-position wall mount must be made of concrete or material with higher
hardness than concrete. Otherwise, it will be risk of falling down.
The wall to install the high-position wall mounted support shall be smooth enough, otherwise, it
will cause the product to be tilted after installation.
Drill 6 holes in the wall with Φ14
driller, the hole depth is 75mm, The
position and dimension of the hole is
as shown on the right diagram;
170
12
5
12
5
14
If the position and dimension of the
installation hole are incorrect, the
installation could not be done.
Install the high-position wall mount (1)
to the wall with hole by M10
expandable bolts (2) and tighten the
nuts (3).
墙
壁
Finish the installation of the
high-position wall-mount.
1
2
3
Wall