All
SportSystems, Inc.
©
2021
MEASURING AND CUTTING EMT POLES
Note:
Corner brackets add about 3” to the depth, height and width of your enclosure, thus poles are cut 3”
shorter than the enclosure dimension as shown below.
EMT poles and STRUT channels for standard bay sizes:
Review the chart below to determine the number and sizes of EMT and STRUT needed for your bay
size.
NOTE:
12’W x 8’H x 5’D
14’W x 8’6”H x 5’D
CENTER SUPPORT:
Only required on
StudioBay systems 16’ wide or larger.
Customers with a SkyRailPLUS will not
need the Center Support Strut.
OTHER DEPTHS:
EMT count is based
on 5ft deep bays. For bays deeper
than 5ft you will need 4 EMT poles for
the depth instead of two. Cut each
depth pole 3” shorter than the bay
depth. (i.e 8ft deep requires 4 poles
7’9” long,)
CUSTOM SIZING:
See next section if
you have a custom height or width.
Purchase Locally:
11 ea 10ft - EMT pole (1" Common)
3 ea 10ft - STRUT (shallow channel)
Purchase Locally:
11 ea 10ft - EMT pole (1" Common)
3 ea 10ft - STRUT (shallow channel)
Cut as follows:
⁍
Height (6):
6 EMT cut to 7'9" [93”]
⁍
Width (4): Set aside:
2 EMT - 10ft ea (no cuts)
2 STRUT - 10ft ea (no cuts)
⁍
Width Extender (4):
1 EMT cut into 2 ea 1'9" [21”]
1 STRUT cut into 2 ea 1’9” [21”]
⁍
Depth (4):
2 EMT cut into 4 ea 4'9" [57”]
Cut as follows:
⁍
Height (6):
6 EMT cut to 8'3" [99”]
⁍
Width (4): Set aside:
2 EMT - 10ft ea (no cuts)
2 STRUT - 10ft ea (no cuts)
⁍
Width Extender (4):
1 EMT cut into 2 ea 3'9" [45”]
1 STRUT cut into 2 ea 1’9” [33”]
⁍
Depth (4):
2 EMT cut into 4 ea 4'9" [57”]
16’W x 9’H x 5’D
18’W x 9’H x 5’D
20’W x 10’H x 5’D
Purchase Locally:
12 ea 10ft - EMT pole (1" Common)
4 ea 10ft - STRUT (shallow channel)
Purchase Locally:
12 ea 10ft - EMT pole (1" Common)
5 ea 10ft - STRUT (shallow channel)
Purchase Locally:
12 ea 10ft - EMT pole (1" Common)
5 ea 10ft - STRUT (shallow channel)
Cut as follows:
⁍
Height (6):
6 EMT cut to 8'9" [105”]
⁍
Width (4): Set aside:
2 EMT - 10ft ea (no cuts)
2 STRUT - 10ft ea (no cuts)
⁍
Width Extender (4):
⁍
Center Support (1):
2 EMT cut into 2 ea 5'9" [69”]
2 STRUT cut into:
2 ea 5’9” [69”]
1 ea 4’0” (center support) [48”]
⁍
Depth (4):
2 EMT cut into 4 ea 4'9" [57”]
Cut as follows:
⁍
Height (6):
6 EMT cut to 8'9" [105”]
⁍
Width (4): Set aside:
2 EMT - 10ft ea (no cuts)
2 STRUT - 10ft ea (no cuts)
⁍
Width Extender (4):
2 EMT cut into 2 ea 7'9" [93”]
2 STRUT cut into 2 ea 7’9” [93”]
⁍
Center Support (1):
1 STRUT cut to 1 ea 4’0” [48”]
⁍
Depth (4):
2 EMT cut into 4 ea 4'9" [57”]
Cut as follows:
⁍
Height (6):
6 EMT cut to 9'9" [117”]
⁍
Width (4): Set aside:
2 EMT - 10ft ea (no cuts)
2 STRUT - 10ft ea (no cuts)
⁍
Width Extender (4):
2 EMT cut into 2 ea 9'9" [117”]
2 STRUT cut into 2 ea 9’9” [117”]
⁍
Center Support (1):
1 STRUT cut into 1 ea 4’0” [48”]
⁍
Depth (4):
2 EMT cut into 4 ea 4'9" [57”]
Page 5 of 35
Last Revised 6/7/22
