All
SportSystems, Inc.
©
2021
ANGLED SIDE SHADES
You will receive two (2) Angled Side Shades. These will create the viewport for your screen and
chosen StudioBay aspect ratio.
Side Shades are installed from
the floor up.
Step 1: Attach LEADING
EDGE to Velcro
Starting from the floor, attach
the Angled Side Shade to the
velcro edge on the side and
corner panels.
Step 2: Attach BOTTOM to
Black Bungee
Using zip ties, attach the bottom
of the side shade to the bottom
black bungee that runs under
the screen.
Step 3: Attach TOP to Cabling
Using Zip ties, attach top of side
shade to the top angled wall
cabling. DO NOT OVER
TIGHTEN. Evenly tension the
side shade with zip ties so that it
hangs flat.
The screen side edge of your
side shade will not attach to
anything. This edge hangs
freely to allow the fabric to
flex.
REPEAT STEPS FOR THE
OTHER SIDE SHADE
Page 29 of 35
Last Revised 6/7/22
