Page 9 of 14
Unscrew the cylinder 728060 and remove from the assembly, it will come free but still attached
will be the ram 764098.
Put the assembled parts into a plastic dust bin or similar vessel, fit the coupling to the top of the
cylinder, attach a hand pump to the coupling and pump out the ram, importantly,
by hand.
The ram will now be free of the cylinder and all seals will be accessible.
To re assemble, fit the ram into the assembly, locate the blade and fit the spring pins, put grease
on the threads and screw in the cylinder using the two tapped holes and the flat bar, remove
the bar, replace the screws and fit the coupling and bonded seal.
The tool is now ready for use.
Views below shows other components in the cutter not previously mentioned with their part
numbers.
