Allsop Home and Garden
Ph: 866-425-5767 Fax: 208-726-0196 Email: [email protected]
Soji
Solar Lantern Instruction Set
Congratulations on the purchase of your Soji
Solar Lantern! Setting up your Soji
Solar Lantern is
simple and can be accomplished in 4 easy steps.
Parts Included in Package:
1.)
1 Nylon Lantern
2.)
Solar Housing Compartment-attached
to nylon lantern
a.
On/Off Power Switch
b.
Dual LED Light
c.
1 AAA Battery (included)
3.)
Metal Wire Frame Support
4.)
Metal Wire Hanging Handle
5.)
Base unit accessory (stand)
Step One: On the bottom side of the plastic solar housing compartment, slide the power switch from the
Off position over to the On position. This toggle switch will activate the AAA rechargeable battery
that is already included inside of the solar housing compartment. Rechargeable batteries are used in
conjunction with solar power to store the energy that is collected by the solar panel each day. Leave in the
On position at all times while placed outside to collect sunlight and emit light at night.
Step Two: While the lantern is still in the flat collapsed position, insert the
circular end of the metal wire frame support around the Dual LED bulb. Pull
the lantern up to begin to form a round shape. Then attach the notched
ends of the wire frame support into the wire rings located on the bottom of
the nylon lantern. By inserting the metal wire frame support your lantern
will pop up into a round lantern shape.
