INSTRUCTIONS
The functions of and times of the control unit are programmed via the configuration menu, which can
be accessed and explored using the 2 MENU and SEL keys.
• To access the programming menu, press the MENU key until the display shows in 1
• To change the value of this parameter, press the MENU key: the display shows the currently set value
(on / oFF)
• Select the desired value with the SEL key and press the MENU button to save the new value: the
display shows in 1 again
• Press the SEL key to select the other parameters to be changed
Using the MENU and SEL keys to select and change the required parameters: in the following pages
there is a table with all programming parameters, values selected, DEFAULT values set and a brief
description of the function
To exit the programming menu, press the MENU key until the display shows the control panel If no
button is pressed for 30 seconds, the control unit exits programming mode and stores the new
parameters.
To load default data, when the control unit is NOT in programming mode, press the MENU and SEL keys
simultaneously until the display shows dEF. With the SEL key, select the default that you want to load
and press MENU to confirm.
NOTE: the control unit is supplied with the dEF1 configuration set
V2 Easy-Top
Visit our website: www.Alloremotecontrol.com
