Allnet ALL130DSL User Manual Download Page 40

Page: 40 / 103

Operation and Status

Connection Details - Fixed IP Address

If your access method is "Direct" (no login), with a fixed IP address, a screen like the
following example will be displayed when the "Connection Details" button is clicked.

Figure 29: Connection Details - Fixed/Dynamic IP Address

Data - Fixed IP address Screen

Internet

IP Address

The IP Address of this device, as seen by Internet users. This address
is allocated by your ISP (Internet Service Provider).

Subnet Mask

The Network Mask associated with the IP Address above.

Default Gateway

The IP Address of the remote Gateway or Router associated with the
IP Address above.

DNS Server

The IP Address of the Domain Name Server which is currently used.

Summary of Contents for ALL130DSL








































































































Search results

Summary of Contents for ALL130DSL

Reviews:

Related manuals for ALL130DSL

Brands by name

Popular brands

Allnet ALL130DSL, User Manual

Search results

Summary of Contents for ALL130DSL

Reviews:

Related manuals for ALL130DSL

Brands by name

Popular brands