Allnet ALL130DSL User Manual Download Page 103

Page: 103 / 103

ADSL2/2+ Broadband Router User Guide

Germering, August 2006

EC – Declaration of conformity

for

ALL130DSL ADSL2/2+ Broadband Router

This equipment conforms with the requirements of the Council
Directive

89/336/EEC, 92/31/EEC, 93/68/EEC

and the mutual recognition

of their conformity.

The safety advice in the documentation accompanying the products shall be obeyed.
The conformity to the above directive is indicated by the CE sign on the device.

The ALLNET ALL130DSL ADSL2/2+ Broadband Router conforms to the European
Directives 89/336/EEC, 92/31/EEC, 93/68/EEC

This equipment meets the following conformance standards:

EN 55022 : 1998/A1 : 2000 (Class B)
EN 55024 : 1998
EN 61000-3-2 :1995/A1/A2 : 1998/A14 :2000
EN 61000-3-3 : 1995/A1 :1998

This equipment is intended to be operated in all countries.

This declaration is made by

ALLNET Computersysteme GmbH
Maistr. 2
82110 Germering

and can be downloaded from

http://www.allnet.de/ce-certificates/

100

Summary of Contents for ALL130DSL








































































































Search results

Summary of Contents for ALL130DSL

Reviews:

Related manuals for ALL130DSL

Brands by name

Popular brands

Allnet ALL130DSL, User Manual

Search results

Summary of Contents for ALL130DSL

Reviews:

Related manuals for ALL130DSL

Brands by name

Popular brands