5.3 The DSL Link LED continues to blink
but does not go solid
1.) This means that the DSL line is trying to train but
for some reason it cannot establish a valid con-
nection. The main cause of this is that you are
too far away from the central office. Contact
your DSL service provider for further assistance.
2.) Verify that the phone line is connected directly
to the wall and to the line input on the ADSL
Router.
3.) Make sure that for every parallel phone line
connected to telephone or fax to install with a
micro filter. Common Problems and Solutions
5.4 The DSL Link LED is always off
1.) Make sure you have DSL service. You should get
some kind of information from your ISP that sta-
tes that DSL service is installed. You can usually
tell if the service is installed by listening to the
phone line; you will hear some high-pitched
noise. If you do not hear high-pitched noise,
contact your ISP.
2.) Verify that the phone line is connected directly to
the wall and to the line input on the ADSL
Router. If the phone line is connected to the
phone side of the ADSL Router or you have a
splitter installed on the phone line, the DSL light
will not come on.
ALL 0333AU – DSL ETHERNET MODEM ROUTER
A L L N E T
®
2 0 0 4
2 1
ALL0333AU_Manual_a 07.04.2004 14:12 Uhr Seite 21
