23
The welded distance is recorded as soon as the drive is running and more than 100 N force is displayed in the
working display (34)
.
The day's distance can be called up as follows:
• Use the
“Up” (27)
and
“Down” (28) arrow keys
to position the cursor on the speed in the
working display (34)
.
• Hold down the
«e-Drive»
for 5 seconds.
• The values of the day's distance and the total distance are now shown in the speed display.
• Briefly pressing the
«e-Drive»
causes the speed to be shown again in the
working display (34)
.
• The
speed working display (34)
is blocked during welding.
• The speed setting is enabled by briefly pressing the
«e-Drive»
.
• Hold down the
«e-Drive»
for 5 seconds.
• The values of the day's distance and the total distance are now shown in the speed display.
• Briefly pressing the
«e-Drive»
causes the speed to be shown again in the
working display (34)
and the
speed working display (34)
is blocked.
Not in welding mode
In welding mode
Display including
day's distance
Hold pressed down for 5 sec.
Press 1 × briefly
Speed blocked
Speed unblocked
Display including
day's distance
8.7 Display of day's distance
