Installation and hardware
20
Prosilica GX Technical Manual V2.3.1
3.
Under
Network Adapters
, locate the Ethernet network adapter, right-click the
entry, and select
Properties
in the menu.
4.
Select the
Advanced
tab.
5.
Select the property
Jumbo Packet
and set the value to
9014 Bytes
.
6.
Click
OK
to save the setting.
Connecting your camera
Use a Category 6 or higher rated Ethernet cable to connect the camera to the host
adapter. Crossover cabling is not required but does work. The camera has circuitry
to determine if a crossover cable is being used.
Downloading camera drivers
Allied Vision GigE cameras work with any or all of the following software options.
Allied Vision recommends Category 6 (Cat 6) or higher rated Ethernet cables. A
different rating may not sustain peak interface bandwidth; leading to lost
connectivity or image data coming from the camera.
Contact your Allied Vision Sales representative or your local Allied Vision
distribution partner for information on accessories.
https://www.alliedvision.com/en/about-us/where-we-are.html
Contact your Allied Vision Sales representative or your local Allied Vision
distribution partner for lens recommendations.
https://www.alliedvision.com/en/meta-header/contact/contact-sales
Vimba Viewer or Vimba SDK:
https://www.alliedvision.com/en/products/software
Third-party software solutions:
https://www.alliedvision.com/en/products/software/third-party-libraries.html
i
i
i
