Installation and hardware CL
34
Goldeye G/CL Technical Manual V4.1.1
Starting the camera
Powering up the camera
To power up the camera, plug the 12-pin Hirose connector into the camera and
wait for the boot phase to complete. For Cool models, use the 4-pin Hirose
connector. The boot phase is indicated by a 1 Hz steady red-green flashing of the
Camera Link status LED.
Connecting to host computer
To connect the camera to the host application, use a Camera Link cable with an
SDR-26 connector for the camera side.
To retrieve information about the required connector type for the frame grabber
(either MDR-26 or SDR-26), refer to the frame grabber manual.
Power supply for Goldeye CL
A power supply for the Goldeye CL series is available from Allied Vision.
Please consult the camera technical manual for connector definition and voltage
specifications.
https://www.alliedvision.com/en/support/technical‐documentation.html
More on accessories:
For more information on accessories contact Allied Vision sales representative or
your local Allied Vision dealer:
https://www.alliedvision.com/en/about‐us/where‐we‐are.html
For a list of compatible Camera Link cables, go to the Allied Vision website:
https://www.alliedvision.com/en/products/accessories/interface-
cables.html#!?cameraInterfacefilter=9
i
i
