Triggering
157
Goldeye G/CL Technical Manual V4.1.1
I/O definition
Explanation of I/O Definitions
External GND and external power (pin 1, pin 2)
For G/CL-008, G/CL-032 and G/CL-033 (all models):
Use pin 1 and pin 2 of the 12-pin connector to supply the camera with power.
For G/CL-008 Cool and G/CL-032 Cool:
Use the Hirose four-pin connector to supply the camera with power.
For more information on power supply refer to Power supply on page 139.
RxD RS232 and TxD RS232 (pin 8, pin 9)
These signals are RS232 compatible. These signals are not optically isolated.
Connect RS232 ground to Camera GND to complete the RS232 circuit.
Pin Color code
Signal
I/O Level
Description
1
Black
External
Power
In
10.8 V to 30.0 VDC
External power
2
Brown
External
Power
In
10.8 V to 30.0 VDC
External power
3
Red
External
GND
In
GND external power
External ground for external
power
4
Orange
External
GND
In
GND external power
External ground for external
power
Table 109: Power connector pin assignment for Goldeye Cool models
Observe the input voltage.
Exceeding the 30 V input voltage can permanently damage the camera.
1
2 3
4
