Bonito Technical Manual
V2.4.0
10
Introduction
•
on page 7 (this chapter) gives you the document his-
tory, a manual overview (short description of each chapter) and conven-
tions used in this manual (styles and symbols).
•
on page 13 gives you information about conformity of
Allied Vision cameras (CE, FCC, RoHS).
•
on page 14 lists camera details and measured spec-
tral sensitivity diagrams for each camera type.
•
on page 17 provides CAD drawings of standard
housing models (2D drawings and 3D isometric drawings), tripod adapter
and cross sections of CS-Mount and C-Mount. Furthermore, you find infor-
mation on adjustment of C-Mount and CS-Mount.
•
on page 22 describes in general the inputs/out-
puts of the cameras (incl. trigger features).
•
on page 81 gives you quick access to all relevant data in this
manual.
Conventions used in this manual
To give this manual an easily understood layout and to emphasize important
information, the following typographical styles and symbols are used:
Styles
Symbols
Style
Function
Example
Bold
Programs, inputs or highlighting
important things
bold
Courier
Code listings, camera output etc.
Output
Courier bold
Commands sent to the camera
Command
Upper case
Register
REGISTER
Italics
Modes, fields
Mode
Parentheses and/or blue
Internet links, cross references
(www.link)
Table 2: Styles
Note
This symbol highlights important information.
