Allied Vision Alvium G1 User Manual Download

Page: 137 / 164

Camera interfaces

137

Alvium G1 User Guide V1.1.1

Status LEDs

Alvium G1 cameras have LEDs to signal in yellow, green, or red color.

LED codes

Error state

If the camera signals an error, try the following to get the camera back to normal

operation:
• Restart the camera.
• Should this fail, please contact support at

www.alliedvision.com/en/about-us/

contact-us/technical-support-repair-/-rma

LED settings

You can define LED settings with the

DeviceIndicatorLuminance

feature:

• A value of

enables LED signaling at the highest luminance level.

• Values below

reduce the luminance level.

•

disables LED signaling.

LED codes

Behavior

Status

Continuously active

Camera is initializing

1 flash per second

Camera is operational

Continuously active

Error state

Table 79: LED codes

Yellow LED color

With yellow, a green and a red LED are active in parallel. Seen directly from behind,

this appears as yellow; seen from an angle, you can see green and red separately.

Summary of Contents for Alvium G1





































































































































































Search results

Summary of Contents for Alvium G1

Reviews:

Related manuals for Alvium G1

Brands by name

Popular brands

Allied Vision Alvium G1, User Manual

Search results

Summary of Contents for Alvium G1

Reviews:

Related manuals for Alvium G1

Brands by name

Popular brands