Appendix
Pearleye Technical Manual
V2.2.0
80
ImageSizeControl
AcquisitionControl
Feature
Description
SensorWidth
Maximum width of the sensor in pixels.
SensorHeight
Maximum height of the sensor in pixels.
WidthMax
This feature represents the maximum width (in pixels) of the
image after horizontal binning, decimation or any other function
changing the horizontal dimensions of the image.
HeightMax
This feature represents the maximum height (in pixels) of the
image after vertical binning, decimation or any other function
changing the vertical dimensions of the image.
Width
This feature represents the actual image width expelled by the
camera (in pixels).
Height
This feature represents the actual image height expelled by the
camera (in pixels).
OffsetX
This feature represents the horizontal offset from the origin to
the AOI (in pixels).
OffsetY
This feature represents the vertical offset from the origin to the
AOI (in pixels).
DecimationHorizontal
Unused.
DecimationVertical
Unused.
PixelFormat
List with all available pixel formats of the camera, e.g. MONO12.
TestImageSelector
Enables or disables the internal test image generator of the
camera.
Table 36: Camera standard feature: ImageSizeControl
Feature
Description
AcquisitionMode
This feature controls the acquisition mode of the software. It
describes how many frames should be acquired.
AcquisitionStart
Starts the image acquisition of the camera.
AcquisitionStop
Stops the image acquisition of the camera.
Table 37: Camera standard feature: AcquisitionControl
