Specifications
Pearleye Technical Manual
V2.2.0
16
Pearleye P-030 LWIR
Note
•
The design and specifications for the products described
above may change without notice.
•
The right polarization of the 12 V supply voltage must be
assured.
•
The warranty becomes void in case of unauthorized tam-
pering or any modifications not approved by the manu-
facturer.
Feature
Specification
Image device
Amorphous silicon uncooled microbolometer focal plane array (FPA)
ULIS UL 04 17 1; built-in electromechanical shutter
Effective chip size
16 mm (H) x 12 mm (V)
Cell size
25 μm x 25 μm
Image size (max.)
640 (H) x 480 (V)
Lens mount
M65 x 0.5
Field of view (FOV)
With 18 mm lens: 47.9° x 36.9°
Focus range
0.5 m to infinity (manually adjustable)
Spectral response
8 ... 14 μm (LWIR)
Pixel format
Mono14
Frame rate
up to 24 fps
Measurement temperature
range
-20 °C ... +80 °C (standard version)
Sensitivity (NETD)
typical
80 mK @ 303 K @ f/1.0
Temperature stabilization
Peltier stabilized
ADC
14 bit
Digital output
14 bit, GigE
Sensor time constant
approx. 7 ms
Smart features
Built-in correction data sets, bad pixel correction, background (FPN)
correction, gain/offset correction (NUC/non-uniformity correction) for
each pixel, drift compensation, temperature linearization (LUT),
continuous mode (image acquisition with maximum frame rate)
With AVT‘s AcquireControl: pseudo color LUT with several color profiles,
auto contrast, auto brightness, temperature measurement, analyze
multiple regions (rectangular, circle, ring, line) within image, real-time
statistics and histogram, background (FPN) correction
Table 4: Specification Pearleye P-030 LWIR
