Introduction
Goldeye Technical Manual
V2.2.0
9
•
on page 22 provides CAD drawings of stan-
dard housing models (2D drawings), tripod adapter and cross sections of
the mounts.
•
on page 30 describes the first steps to get the camera
into operation: camera control signals and camera controls as well as
adjusting the image process.
•
on page 36 describes the control junction (I/O
pin assignment), inputs / outputs and trigger features.
•
on page 54 describes the function of the
Goldeye P-.../Goldeye CL-...
firmware. It is related to the individual
modules of image processing and shows in what way the user can control
these modules via the serial interface.
•
on page 59 describes the basic
configuration options and general commands available for the user, being
important for the operation of an ex factory preconfigured camera. Most
probably the information stated here will be sufficient for most of the
users.
•
Advanced parameters and commands
on page 64 describes the
advanced configuration of the
Goldeye P-.../Goldeye CL-...
models. For
the control of an ex-factory set up camera the intervention within the
parameters stated here or rather the use of the mentioned commands is
only necessary in exceptional cases.
•
on page 79 describes the
general command reference of the
Goldeye P-.../Goldeye CL-...
firmware.
•
on page 97 gives you quick access to all relevant data in
this manual.
Conventions used in this manual
To give this manual an easily understood layout and to emphasize important
information, the following typographical styles and symbols are used:
Styles
Style
Function
Example
Bold
Programs, inputs or highlighting
important things
bold
Courier
Code listings etc.
Input
Upper case
Register
REGISTER
Italics
Modes, fields
Mode
Parentheses and/or blue
Links
(Link)
Table 2: Styles
