Specifications
Goldeye Technical Manual
V2.2.0
15
Goldeye CL-008 SWIR/ Goldeye CL-008 SWIR
Cool
Feature
Specification
Image device
InGaAs sensor, progressive scan; electronic full-frame shutter
Effective chip size
9.6 mm (H) x 7.68 mm (V)
Cell size
30 μm x 30 μm
Image size (max.)
320 (H) x 256 (V) full resolution
320 (H) x 160 (V) reduced resolution
Lens mount
C-Mount
Spectral response
900 ... 1700 nm (SWIR)
Frame rate
up to 100 fps full resolution
up to 186 fps reduced resolution
Exposure time
32 μs ... 100 ms / 32 μs ... 1 s
Cooling
Goldeye CL-008 SWIR Cool only:
Peltier cooled
+0 °C stabilized
ADC
14 bit
Digital output
12 bit
Digital interface
Camera Link Base
Smart features
Switchable gain (factor 10 at short exposure times), built-in correction
data sets, gain/offset correction (NUC/non-uniformity) for each pixel,
bad pixel correction, background (FPN) correction, continuous mode
(image acquisition with maximum frame rate), image on demand mode
(triggered image acquisition)
With AVT‘s AcquireControl software: pseudo color LUT with several color
profiles, auto contrast, auto brightness, analyze multiple regions
(rectangular, circle, ring, line) within the image, real-time statistics and
histogram
Power requirements
+ 12 V (-0% / +5%)
Goldeye CL-008 SWIR: 0.4 A
Goldeye CL-008 SWIR Cool: 0.9 A (max. 2.6 A)
Dimensions
Goldeye CL-008 SWIR: 74
mm x 90 mm x 71 mm (L x W x H)
Goldeye CL-008 SWIR Cool: 101
mm x 90 mm x 99 mm (L x W x H)
each model incl. connectors, without tripod and lens
Mass
Goldeye CL-008 SWIR: 600 g
Goldeye CL-008 SWIR Cool: 1400 g
Table 4: Specification Goldeye CL-008 SWIR / Goldeye CL-008 SWIR Cool
