C613-50170-01 Rev B
Command Reference for x510 Series
424
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
L
OGGING
C
OMMANDS
LOG
HOST
(
FILTER
)
log host (filter)
Overview
This command creates a filter to select messages to be sent to a remote syslog
server. Selection can be based on the priority/severity of the message, the program
that generated the message, the logging facility used, a substring within the
message or a combination of some or all of these.
The
no
variant of this command configures the device to no longer send log
messages to a remote syslog server. The IP address of the syslog server must be
specified. All configuration relating to this log target will be removed.
Syntax
log host <
ip-addr
> [level
<level>
] [program
<program-name>
]
[facility
<facility>
] [msgtext
<text-string>
]
no log host <
ip-addr
> [level
<level>
] [program
<program-name>
]
[facility
<facility>
] [msgtext
<text-string>
]
Parameter
Description
<ip-addr>
The IP address of a remote syslog server.
level
Filter messages by severity level.
<
level
>
The minimum severity of message to send. The level can be specified as one of the following
numbers or level names, where 0 is the highest severity and 7 is the lowest severity:
0|emergencies
System is unusable
1|alerts
Action must be taken immediately
2|critical
Critical conditions
3|errors
Error conditions
4|warnings
Warning conditions
5|notices
Normal, but significant, conditions
6|informational
Informational messages
7|debugging
Debug-level messages
program
Filter messages by program. Include messages from a specified program.
<
program-
name
>
The name of a program to log messages from, either one of the following predefined program
names (not case-sensitive), or another program name (case-sensitive) that you find in the log
output:
rip
Routing Information Protocol (RIP)
ripng
Routing Information Protocol - next generation (RIPng)
ospf
Open Shortest Path First (OSPF)
ospfv3
Open Shortest Path First (OSPF) version 3 (OSPFv3)
rsvp
Resource Reservation Protocol (RSVP)
pim-dm
Protocol Independent Multicast - Dense Mode (PIM-DM)
pim-sm
Protocol Independent Multicast - Sparse Mode (PIM-SM)
