Allied Telesis x510-28GPX, Command Reference Manual

Page: 2625 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 2625
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
LLDP C
OMMANDS
LLDP REINIT
lldp reinit
Overview This command sets the value of the reinitialization delay. This is the minimum time
after disabling LLDP on a port before it can reinitialize.
The no variant of this command sets the reinitialization delay back to its default
setting.
Syntax
lldp reinit < 1-10 >
no lldp reinit
Default The default reinitialization delay is 2 seconds.
Mode Global Configuration
Examples To set the reinitialization delay to 3 seconds, use the commands:
awplus# configure terminal
awplus(config)# lldp reinit 3
To set the reinitialization delay back to its default, use the commands:
awplus# configure terminal
awplus(config)# no lldp reinit
Related
Commands
show lldp
Parameter Description
< 1-10 >
The delay in seconds.