C613-50170-01 Rev B
Command Reference for x510 Series
2430
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
A
LLIED
T
ELESIS
M
ANAGEMENT
F
RAMEWORK
™ (AMF) C
OMMANDS
USERNAME
username
Overview
This command enables you to assign a
username
to a guest class. Guests may
require a username and possibly also a password. In its non-encypted form the
password must be between 1 and 32 characters and will allow spaces. In its
encrypted form the password must be between 1 to 64 characters and will allow
any character
Syntax
username <
NAME
> password [8] <
USERPASS
>
no username
Default
No usernames configured
Mode
AMF Guest Configuration Mode
Example 1
To assign the user name
reception
and the password of
secret
to an AMF guest
node that has the guest class of
phone1
use the following commands:
node1#
conf t
node1(config)#
amf guest-class phone1
node1(config-atmf-guest)#
username reception password secret
node1(config-atmf-guest)#
end
Example 2
To remove a guest node username and password for the user guest class
phone1
,
use the following commands:
node1#
conf t
node1(config)#
atmf guest-class phone1
node1(config-atmf-guest)#
no username
node1(config-atmf-guest)#
end
Related
Commands
Parameter
Description
username
Indicates that a user name is to follow
<NAME>
User name of the guest node
password
Indicates that a password (or specifier) is to follow.
8
Specifier indicating that the following password is encrypted. It's
primary purpose is to differentiate between the configuration
input and the CLI input. You should not specify this for CLI input
<
USERPASS
>
The password to be entered for the guest node.
